Products
Multi-turn Motorized Slide Electric Gate Valve
A Electric Gate Valve, also known as a sluice valve, is a valve that opens by lifting a barrier (gate) out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened.
A Electric Gate Valve, also known as a sluice valve, is a valve that opens by lifting a barrier (gate) out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened.
Model
- Actuator Type: Multi-turn electric actuator
- Body Material: Stainless steel 304/316/316L or WCB
- Pressure: 16 bar (Special pressure could be customized)
- Temperature Of Media: -10℃ to 400℃
- Suitable Media: Pulp, cement, syrup, etc
- Voltage: AC380V (Other voltage could be customized)
- Connection Type: Flanged
Cast Iron Slide Electric Gate Valve
- Good sealing performance, small friction between sealing surfaces and long life
- In the process of opening and closing, the friction of the sealing surface is smaller than that of the gate valve, which is wear-resistant
- usually only one sealing surface, good manufacturing process, easy to maintain
- Electric actuator is easy to operateDesign & Manufacture: KS B2361Construction Length: KS B2361
- After the test, remove stagnant water, suburban viscera, anti-rust treatment
Technical Parameters of Valve Actuator
| Power supply | conventional: single phase 220v, three phase 380v |
| special: three phase 400v, 415v, 660v(50Hz, 60Hz) | |
| Working environment | Ambient temperature: -20 ~ + 60 ℃ (special temperature environment can be customized) |
| Relative humidity: 95% (at 25 ° C) | |
| Protection level | Outdoor type and explosion-proof type are IP55 (IP65, IP67, IP68 can be provided for special order) |
| Working system | short time 10 minutes (15-60 minutes for special order) |
Technical Parameters of Valve Body
| Valve Body | Valve components | ||
| Nominal size | DN50-DN400 | Sealing material | PTFE, EPDM |
| Body Material | Stainless Steel | Disc Material | Stainless Steel |
| End Connection | Flange Ends & Butt welding Ends | Stem Material | Carbon iron |
| Operating Pressure | ASME CL, 150, 300, 600, 900, 1500, 2500 | Applicable media | Water, Air, Gas, Petroleum, Oil, Liquid |
| Valve Body | Valve components | ||
| Nominal size | DN50-DN400 | Sealing material | PTFE, EPDM |
| Body Material | Stainless Steel | Disc Material | Stainless Steel |
| End Connection | Flange Ends & Butt welding Ends | Stem Material | Carbon iron |
| Operating Pressure | ASME CL, 150, 300, 600, 900, 1500, 2500 | Applicable media | Water, Air, Gas, Petroleum, Oil, Liquid |
